#musicbrainz-devel

I got this error when i executed admin/InitDB.pl: DBI connect('dbname=template1','postgres',...) failed: FATAL: role "postgres" does not exist at /home/ubuntu/perl5/lib/perl5/DBIx/Connector.pm line 32.

did I neglect something? since I never specified dbname as template1 and role as postgres; did I forget to change something?

that's for the system user/superuser, which is needed for some parts of the database setup

it's the SYSTEM key in DBDefs

what should I do, ian?

figure out what the issue is, probably :) I don't know why your system wouldn't have a postgres user, so you'll need to figure out what the superuser name is and then update the configuration

yanggao: I had this issue the other day, let me see if I can remember for you

thanks!!

I think it was to do with the setup of the database authentication (pg_hba.conf/pg_ident.conf) - I think I got it working by using the "alternative" setup for development purposes (listed below the main authentication setup)

that wouldn't tell you it doesn't exist, at worst it'd tell you you don't have access

if I'd wanted to set up the mb server, I would've found a proper solution, but since I only wanted access to the database, I decided to just use the "local all all trust" line

I removed all lines in “/etc/postgresql/9.3/main/pg_hba.conf”, and inserted this: “/etc/postgresql/9.3/main/pg_hba.conf” as in “Alternatively”

And I got the error as described…

here's my conf file: http://pastebin.com/BJQ30XZP

try using that - if it doesn't work, I'll go back a bit further in my history

Okay, so I have made progress... I now know that the plugin fails when I call file.save()

also, have you modified the database username in lib/DBDefs.pm at all? if not, then you'll need to create the "musicbrainz" user

InitDb creates the user for you, that's one of the things it needs superuser for

any issues with that?

ianmcorvidae: it didn't when I followed INSTALL.md

hmm ok

yanggao: how are you running the command? Just "./admin/InitDb.pl --createdb --import ..."? Also, did you restart the database server after you updated the pg_* files ("sudo service postgresql restart")?

do you mean instead of “./admin/InitDb.pl”, I should use “sudo ./admin/InitDb.pl”?

no, I don't think so... I attempted "sudo -u postgres ./admin/InitDB.pl" a few times, but the last one I ran was just a plain "./admin/InitDB.pl"

I see.

LordSputnik: I am using your pg_hba.conf, and restarted server, does not work…

hmm, what does the output of "sudo -u postgres ./admin/InitDB.pl" give you? Is it any different?

$ sudo -u postgres ./admin/InitDB.pl

sudo: ./admin/InitDB.pl: command not found

oh sorry, "./admin/InitDb.pl"

I put a B instead of a b

Can't locate MooseX/Singleton.pm in @INC (you may need to install the MooseX::Singleton module) (@INC contains: /home/ubuntu/tools/musicbrainz-server/admin/../lib /etc/perl /usr/local/lib/perl/5.18.2 /usr/local/share/perl/5.18.2 /usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.18 /usr/share/perl/5.18 /usr/local/lib/site_perl .) at /home/ubuntu/tools/musicbrainz-server/admin/../lib/MusicBrainz/Server/Translation.pm line 2.

BEGIN failed--compilation aborted at /home/ubuntu/tools/musicbrainz-server/admin/../lib/MusicBrainz/Server/Translation.pm line 2.

Compilation failed in require at /home/ubuntu/tools/musicbrainz-server/admin/../lib/DBDefs/Default.pm line 33.

BEGIN failed--compilation aborted at /home/ubuntu/tools/musicbrainz-server/admin/../lib/DBDefs/Default.pm line 33.

Compilation failed in require at /usr/share/perl/5.18/parent.pm line 20.

BEGIN failed--compilation aborted at /home/ubuntu/tools/musicbrainz-server/admin/../lib/DBDefs.pm line 29.

Compilation failed in require at ./admin/InitDb.pl line 35.

aha

BEGIN failed--compilation aborted at ./admin/InitDb.pl line 35.

I also got that

yeah, that'll happen when you switch to a different user

also, if you're putting a lot of lines in chat, you should be using a pastebin

I see… thanks.

as I said already, permissions are not going to be your problem, you're missing a superuser or have it under a different nabe

name*

could you be more detailed what I should do?

yanggao: following that, I tried installing MooseX::Singleton, but that wasn't the right thing to do

me either! tried that.

I also checked the dependencies using "cpanm ."

LordSputnik: do you just have me ignored? you seem to be fond of saying worthless things that won't be helpful after I've told you they won't

sorry! that is my fault

ianmcorvidae: all I'm doing is trying to repeat what worked for me

perhaps the manual needs fixing if two users run into the exact same problem less than two weeks apart?

apparently it didn't work for you, or you had a different problem, since all of your proposed steps have been obviously wrong

the solution here is to figure out what is wrong with your postgresql install, since that's the issue. possibly some distribution is doing something destructive with their postgres package and that's the root of it -- maybe that warrants adding to the instructions if it can be narrowed to that

anyway, I'd consider looking at some of the solutions on http://stackoverflow.com/questions/7863770/rail...

I can't give specific recommendations becaus it's specific to whatever's broken about your server, which obviously I can't determine

Hey guys

I just upgraded to the dev 1.3 from 1.2

and HOLY SHIT

It is fast, and slick

You guys are doing awesome!

Thank you for all your hard work

glad to hear that, it's a nice departure from the angry support emails we normally get XD

Well, some people are just dumb

:p

TIL that using abbreviations as project names only makes sense if you actually write down their meaning somewhere <.<

heh, which one? :P

I had started to write some code a few months ago to generate one of those top 10 albums lists on last.fm, just with images from the CAA

turns out it's not obvious that "dhis" means "das hör ich so" :P

haha

anyway cool

ruaok: getting visa wasn't so hard after all :)

wow, good.

glad to hear it.

probably because we are too far from all the action

is it possible in CAA for some release group or release to have multiple images with the same type?

release groups always have exactly one image and it's always a front

releases can have multiple images of the same type, however

(the release group image is really just a pointer to a release to use the so-called "frontiest" image (i.e. the one marked Front closest to the front of the list) from)

okay, thanks

Hey, to anyone on the picard team

I have been running some large collections through 1.3, and I have noticed that if there are a large group of files selected while saving it seems to go much slower

I would assume this is because it is updating the Original and New panes, but I can't be sure

However, when I deselect the tracks being saved, and select a single release, track or even a group that isnt being saved, this behaviour does not occur

Just though I would through it out there... Maybe try suspending the updates on save and see if there is a significant performance gain

or if I am just crazy :p

Thank you guys for all your hard work (all of the teams)

You guys are amazing!

picard folks might check here, but you might (also) consider filing an issue at http://tickets.musicbrainz.org/browse/PICARD with what you're seeing

(if nothing else, it's easier to search and find later that way!)

Thanks ianmcorvidae

Will do

Though probably when I am slightly more coherent

:p

chirlu`: i doubt you read the logs but http://chirlu.mbsandbox.org/edit/20673822 looks great ! :)

hello there… there is a multiple barcodes ticket assigned to Sean Burke, it was decided long tim ago to deploy this change but it seems the assignee is no longer active in MB, is he ? should the tickets (2) be re-assigned ?

MBS-3978 and MBS-6024

oh but i gues iít taken care ò usually when someone “leaves”, the tickets are páed…

Well Leftmost is still around :p

But I don't know if he's planning to write that

leftmost ! ok great that rings a bell, i didn’t know his real name was S.B. :)

it’s me again… we have a track entity with an editsPending property and an associated recording entity with a editsPending… as far as i know, only recordings can have pending edits, am I right ?

only releases and recordings… how can a track have pending edits ?

maybe i mislook something…